Amibot PRIME 2 Mode D'emploi page 31

Troubleshooting
Appliance
03
suction lost.
The appliance
04 is hard to
maneuver.
The remote
05 control does not
work.
If none of the above-mentioned steps provide a solution for your
problem, please contact the AMIBOT after-sales department.
1. The dust bin is full.
2. The central brush or
the side brushes are
blocked.
1. The wheels are
jammed.
1. The batteries are not
inserted or need to be
replaced.
2. The remote control is
broken.
29
1. Empty the dust bin,
clean the motor and
the filters.
2. Remove any hair
and debris from
the brushes. Check
that there is no dirt
obstructing the robot.
1. Clean the vacuum
wheels and remove
the hair and other
debris caught up
around them.
1. Replace the batteries.
2. Replace the remote
control for a new one.
EN