Final Installation; Installing The Access Cover And Forming The Copper Tubing - Whirlpool EZ CONNECT Guide D'installation

Final Installation

Installing the access cover and forming the
copper tubing
1. Reinstall the rear access cover on the
refrigerator so the water valve tubing is
inside the cover, and the copper water line
is outside (see the diagram below), then
secure the cover with the seven hex-head
screws you removed earlier.
2. Loop the copper tubing coming from the
water valve as shown. Position the coiled
copper tubing near the center of the unit so
that it forms an "accordion-fold" (as shown
in the diagram below) when it is moved to-
and-from the wall.
Hex-head
screws

Installing the access cover and forming the copper tubing

Form tubing
loops as
shown
Rear access
cover
Copper tubing
Place water
valve tubing
behind cover
Hex-head
screws
13