Cleaning The Air Filter; Replacing The Belt - Husky C602H Guide D'utilisation Et D'entretien

Maintenance (continued)

CLEANING THE AIR FILTER

From time to time, the air filter needs to be removed
and cleaned.
□
Turn the air compressor OFF ( O ).
□
Unplug the air compressor.
□
Unsnap the air filter cover (1) to remove.
□
Remove the air filter (2) from the air filter
housing (3).
□
Blow compressed air through the air filter for
10-15 seconds.

REPLACING THE BELT

WARNING: Serious injury or damage may occur if parts
of the body or loose items get caught in moving parts.
Never operate the outfit with the belt guard removed.
The belt guard should be removed only when the air
compressor power is disconnected.
□
Turn the air compressor off, lock out the power
supply, and relieve all air pressure from the air
tank.
□
Remove the four fasteners from the belt guard.
The front belt guard can now be lifted up and
away from the unit.
□
Mark the pump position on the saddle.
□
Loosen the motor mounting screws and slide the
motor toward the air compressor.
□
Remove the belt and replace with a new one.
□
Mark the pump position on the saddle.
□
See Adjusting the Belt Tension before tightening
the motor mounting screws.
3
1
2
L
M
21
Please contact 1-888-43-HUSKY for further assistance.
N
HUSKYTOOLS.com