Electrical Safety (Speed And Wiring) - Husky C602H Guide D'utilisation Et D'entretien

Safety Information (continued)

ELECTRICAL SAFETY (SPEED AND WIRING)

□
The no-load speed of this product is approximately
1,200 rpm. This speed is not constant and
decreases under a load or with lower voltage.
□
For voltage, the wiring in a shop is as important as
the motor's horsepower rating. A line intended only
for lights cannot properly carry a power tool motor.
Wire that is heavy enough for a short distance will
be too light for a greater distance. A line that can
support one power tool may not be able to support
two or three products.
ELECTRICAL SAFETY (GROUNDING
INSTRUCTIONS)
□
This product must be connected to a grounded,
metallic, permanent wiring system, or an
equipment-grounding terminal or lead on the
product.
6