Dyna-Glo DGA480BSP Mode D'emploi page 10

ASSEMBLY INSTRUCTIONS
7. Slip main burner control knobs (M) and side
burner control knob (N) onto the valve stems
located on the front control panel of the grill
body (O). Remove preassembled screws (HH)
from the lid handle. Attach the lid handle (U)
by inserting two screws (HH) from inside the
lid of the grill body (O), through the lid handle
bezels (V), into the handle (U) and tightening
securely.
Hardware Used
HH
M6 x 25 Screw
8. Lock the back two casters to ensure the cart
doesn't move. Carefully place the grill body (O)
over the mounting tabs on the cart side panels
(D and E) and onto the cart. Adjust the grill
body (O) so that the holes in the grill body (O)
are aligned with the holes in the tabs of the
cart side panels (D and E). NOTE: Make sure
the gas hose is inside the cart. Secure the
grill body (O) using 2 screws (EE) on each side.
Hardware Used
EE
M6 x 20 Screw
7
M
x 2
8
x 4
10
U
HH
N
TT
V
O