For The User; Functional Principle - AEG RTi 100 M Notice D'utilisation Et De Montage

For the User

1. Operating Instructions
RTi 100 M
The RTi 100 M room temperature regulator is a mechanical two-position controller. When the
room temperature is too low, the fans of the storage heater in the RTi 100 M are switched on
automatically and operated at constant speed.
On reaching the room temperature set on the room temperature regulator, the fans are switched
off automatically by the RTi 100 M.

1.1 Functional Principle

The room temperature regulator is switched on and off by the ON/OFF switch (C) on the storage
heater's control panel. The desired room temperature can be set continuously with the selector
knob on the control panel.
If the selector knob (D) is in the middle position, the room temperature is controlled constantly to
approx. 20 °C. By turning the selector knob to the left or right, the room temperature can be set
between about 5 °C and 35 °C.
When the room temperature drops below the set value, the room temperature regulator automa-
tically switches on the storage heater fan motors so that the stored heat is blown into the room.
On very cold days it is advisable to leave the room temperature regulator switched on during long
periods of absence (several days) to keep the temperature at about 10°C for example so that the
building or room does not go cold (protection against frost).
10