Maintenance And Cleaning - Suevia 311 Notice D'utilisation

Each type of water deposits impurities and lime at high temperature.
These deposits have a negative impact on functioning and product life of the heating unit.
the reason why in case of hard water conditions an anti-liming unit should be placed before the
circuit.
Therefore it is necessary to decalcify the heating unit and the heating element
from time to time.
Maintenance:
- Never use the heating unit without water!
- Heating unit has to be bled regularly once per month.
! Attention: hot water may escape !
- Heating unit has to be thoroughly cleaned and decalcified at least twice per year,
if required several times per year: frequency depends on local water hardness and quality.
Proceedure:
1. Put the main switch on 0 = OFF.
For cleaning purposes the heating unit has to be separated from main current!
2. Pull the plug of the heating element. Turn off water flow. Drain water line completely.
! Attention: in case of drainage hot water can escape!
3. Screw out the heating element -> only turn at hexagon steel plate
4. Put heating element into a bucket with cleaner, or anti-liming agent e.g. vinegar
essence
5. Let the anti-liming agent to react
-> time for reaction depends on used cleaner and level of lime deposits (30 min - 4 hours)
6. Clean the cast iron cage with a bottle brush
-> In case of intense deposits (minerals/rust/lime/incrustation deposits) also clean the cast
iron cage with the lime cleaner -> flush the heating unit with the clear water --> then wash
up the heating element with the clear water
7. Assemble it in reverse order
8. Start the heating unit (see page 17)
9. Dispose the cleaner in a environment-friendly way.
1
1
2
3
2

Maintenance and Cleaning

40 C°
0
1
1½"
7 = assemble the parts in reverse order!
6
!
3
4
That is
5
30 - 240 min
25