Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. Safety Information for This Machine
Requirements for Relocating Machines
CAUTION
•
When moving the machine, do not hold the control panel. Doing so may
damage the control panel and can result in injury or malfunction.
•
When moving the machine with the optional paper tray unit attached, do not
push the upper part of the main unit forcibly. Doing so can cause the main
unit to detach from the optional paper tray unit, possibly resulting in injury.
•
When carrying or moving the machine by lifting it for relocation to another
floor, contact your service representative. Dropping or toppling the machine
can result in injury or malfunction.
•
When moving the machine, make sure to unplug the power cord from the wall
outlet and confirm that line cords and other connecting cables have been
removed. Otherwise, the power cord is damaged, possibly resulting in fire
or electric shock.
Requirements for Using the Machine
CAUTION
•
Do not look into the light source. Doing so may damage your eyes.
•
If the expansion tray is installed, do not pull out more than one tray at a
time. Also, close the front cover and rear cover. Pressing down forcefully on
the machine's upper surface might cause the machine topple over, possibly
resulting in injury.
•
Do not use stapled sheets of paper, aluminum foil, carbon paper, or any kind
of conductive paper. Doing so can result in fire.
•
Keep SD cards and USB flash memory devices out of reach of children. If a
child accidentally swallows an SD card or USB flash memory device, consult
a doctor immediately.
•
When lowering the ADF, do not place your hands on the hinges and exposure
glass. Your hands or fingers are caught, which can result in injury.
Install or remove options after disconnecting the power cord plugs from
•
the wall outlet and confirming that the main unit is not hotter than the room
temperature. Otherwise, you will be burned.
Requirements for Handling the Machine's Interior
WARNING
•
Do not remove any covers or screws other than those explicitly mentioned in
this manual. There are high voltage components inside the machine that can
cause electric shock. Also there are LED components inside the machine
that can cause eye damage. Contact your sales or service representative if
any of the machine's internal components require maintenance, adjustment,
or repair.
•
Do not disassemble or modify this machine. Doing so can result in fire and
electric shock. Also, exposure to the LED components inside this machine
risks eye damage.
CAUTION
•
There are highly-heated parts inside the machine. When removing misfed
paper, do not touch areas other than those specified in this manual. Touching
those areas can result in burns.
•
There are parts inside the machine that may break when touched. When
removing misfed paper, do not touch connectors, sensors, and LED specified
in "Cautions in Removing Jammed Paper", Troubleshooting in web manual.
Touching them can result in malfunction.
•
Although the machine is designed so that a safety device protects users from
injury, take care not to touch the rollers during operation. The rollers may
pinch before stopping completely.
•
Contact your sales or service representative for cleaning the machine's
interior and vents. If the machine's interior is not regularly cleaned while dust
accumulates, fire and malfunction can result.
•
When replacing paper or removing jammed paper, make sure not to trap or
injure your fingers.
The fusing unit becomes hot. When removing the fusing unit, wait for 15
•
minutes or more after opening the cover and confirm that it has cooled
sufficiently. Otherwise, you will be burned.
•
Clean areas around the resist roller after confirming that the machine is turned
off and the main unit is not hotter than the room temperature. Otherwise, you
will be burned.
4
Publicité
Table des Matières
