Specifications; Before Assembly - Nautilus R514 Mode D'emploi

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level
surface. Allow a workout area of minimum 107" x 65" (2.7m x 1.7m).
Follow these basic points when you assemble your machine:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left
(counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through
the holes.
5. The assembly requires 2 people.

Specifications

Before Assembly

4 4 4