Aquadistri SF HC100A Mode D'emploi page 23

appear on the display, press the " "button for increasing temperature or "
" button for decreasing temperature to choose your required temperature.
The setting temperature is from 3 to 32 , then confirm the temperature
value by pressing the ( SET ) button again or just waiting for eight seconds.
The aquarium water temperature will appear on the display while the chiller is
working.
TEMPERATURE ERROR ADJUSTMENT ( )
The common setting is " ". When the aquarium water temperature is
different from the temperature value appearing on the display of the chiller, you
can adjust the error as following:
Press " " and " " buttons at the same time for 6 seconds till the display
twinkles, then press" " or " " button separately for temperature error
adjustment, ranging from-1.5 ~+1.5 . ( Do not use this function frequently if
it is not necessary. )
THE CHILLER PROTECTION DEVICE TO BE RESPONDING
Protection device is provided with the chiller. The refrigeration compressor
needs three minutes after resetting and for the first time, it needs about one
minute.
REFRIGERATION COMPRESSOR ON & OFF AUTOMATICALLY
When the refrigeration compressor stops working for over three minutes & the
water temperature is 1 above the setting temperature, the compressor will
start for working again automatically. The compressor will stop working
automatically when the aquarium water temperature reaches or below the
setting temperature. The light "6" on the upper part of the display appears to
indicate that the compressor is working, turns off to indicate the aquarium
water temperature reaches the set temperature and the compressor stops
working; the light twinkles to indicate that the protection device to be
responding for three minutes.
AUTOMATIC BREAKDOWN DISPLAY SYSTEM
Automatic breakdown display system is also provided with the chiller. When
the water temperature sensor has open circuit or has broken circuit, the letters
"P1" or "P2" will appear on the display and the protection device will be
responding to stop the chiller.
10