Dell Force 10 S50N Guide De Démarrage Rapide page 18

• Characters within the string can be letters, digits, and hyphens.
Task
Create a new host name.
Access the System Remotely
You can configure the system to access it remotely by Telnet.
The S50N and S50V chassis do not have a dedicated management port.
Configure any port on the chassis to be the port through which you manage the
system and configure an IP route to that gateway.
Step Task
Configure an IP address for the
1
port through which you will
manage the system.
Configure an IP route with a
2
default gateway.
Configure a username and
3
password.
Configure a Username and Password
In FTOS, you can assign a specific username to limit user access to the system.
Task
Assign a user name
and password.
Configure the optional
and required
parameters.
To view usernames, use the show users command in the EXEC Privilege mode.
16
Installing the Software
Command Syntax
hostname name
Command Syntax
ip address
ip route
username
Command Syntax
username name [access-class access-list-
name] [nopassword | password
[encryption-type] password] [privilege
level]
Command Mode
CONFIGURATION
Command Mode
INTERFACE
CONFIGURATION
CONFIGURATION
Command Mode
CONFIGURATION