Restoring Factory-Set Beverage Stations - Waring Commercial MX1300XTEE Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

. Next, you will need to set values. Press the program button you want to

replace (i.e.

TO SET SPEED: 15%.

NOTE: 15% is the default speed setting in the reprogramming mode.

3. Press SPEED UP

value. The increment is 1% (150 RPM's). Press and hold the button to

scroll quickly through speeds. The speed can be set between 15%

and 100%

4. Once required speed is reached, Press

seconds to confirm setting. The LCD will now prompt USE UP/DOWN

TO SET TIME 5. NOTE: Five seconds is the default time setting in the

reprogramming mode.

5. Use SPEED UP

(up to 90 seconds). Once the limit of 90 seconds is reached, pressing

SPEED UP

MEMORY LIMIT for seconds.

6. Press

PULSE button or wait 5 seconds to confirm the setting. When

the blending time is confirmed, the LCD will prompt SELECT ANOTHER

SPEED. Repeat steps 3 through 5 if additional processing is needed.

NOTE: When pressing SPEED UP

set speed for next section, the LCD will prompt USE UP & DOWN TO

SET SPEED: (defaults to last speed set).

7. To save the new program settings, press both SPEED UP

SPEED DOWN

PROGRAM (PROG #) SAVED for 5 seconds. The blender will return

to standby mode and the LCD will prompt PRESS ANY BUTTON TO

BLEND.

NOTE: If no button is pressed for 60 seconds when prompted to ADD

NEW PROGRAM, the blender will exit new programming mode

and will return to standby mode. The new program will not be stored.

8. To run new programs, simply press the desired program button and the

blender will run the program set by the user. The LCD will display NEW

PROGRAM # and will display the speed setting and count down the

set time.