Reprogramming Beverage Stations - Waring Commercial MX1300XTEE Mode D'emploi

To do this, hold the
SPEED DOWN
show the setting speed and motor speed will change.
NOTE: The speed can be set from 15% to 100%. Once the
button is released, the motor will shut off and the blender will return to
standby mode. The changed pulse speed will be stored in memory to
replace the default speed at 100%.
There are four program buttons for four reprogrammable beverage stations
for easy operation and consistent results. The factory-set stations are
programmed as listed below:
1. To run any of the above preset programs, blender must be in
standby mode.
. Press desired program button to start the blender. The motor will run at
the preset speed within the preset blending time. The LCD will show
the speed percentage and the time remaining. Once the blender counts
down to 0, the motor will stop running and the blender will return to
standby mode and prompt PRESS ANY BUTTON TO BLEND.
NOTE: To terminate a blending program, simply press the STANDBY
button or any of the program buttons. After doing this, the blender will
return to standby mode and LCD will prompt PRESS ANY BUTTON
TO BLEND.
Users can add 4 new programs to meet their needs. A program can consist
of several sections, each with a different speed and running time.
For example:
as shown below:
Section 1: speed = 75%, time = 30 seconds
Section : speed = 100%, time = 0 seconds
Section 3: speed = 50%, time = 0 seconds
The program has the following limitations:
Speed: 15% to 100%
Time: 5 to 90 seconds
Total running time in a program cannot exceed 90 seconds, i.e. sum
of the sections cannot be longer than 90 seconds.
NOTE: The
step during the reprogramming process.
1. To enter new program, press both SPEED UP
buttons simultaneously while unit is in standby mode. The blender
will enter new programming mode and the LCD will prompt ADD NEW
PROGRAM.
PULSE button and press the SPEED UP
button to adjust the blending speed. The LCD will
REPROGRAMMABLE STATIONS
Liquid drinks
Frozen drinks
Ice cream drinks
Smoothie drinks

REPROGRAMMING BEVERAGE STATIONS

can be replaced with a new program that has 3 sections,
PULSE button will act as the enter key to proceed to next
6
PULSE
and SPEED DOWN
or