Comelit MiniTouch Mode D'emploi page 8

EN
1: RFID reader.
2: 3.5" touch screen.
3: Tamper.
4: Ethernet connector (for future uses)*.
5: Terminal block for connection.
6: Magic light.
Description of terminal block for connection.
* The Ethernet and RS485 ports on the device should only be connected to other
Comelit devices or to other 10Base2 Ethernet, 10BaseT Ethernet or RS485
ports where there is no potential overvoltage on the distribution system (wiring
contained within a single building).
** The device must be powered by Comelit Art. 20022101 or another security power
supply unit in compliance with EN 61558-2-6.
1
2
V+ V-: Power supply terminals**
D: SimpleHome bus data terminal
A B: 485 terminals for alarm switchboard
NC COM NO: Thermostat relay voltage-
free contacts
I1 I2 I3: Open Collector outputs for multi-
speed Fan-coil connection.
DESCRIPTION
3
4
5
6