Transporting The Machine; Electrical Connection; Controls - Tornado Marathon 350 Manuel D'instructions

Transporting the Machine

When transporting the machine ensure that all components, tanks and removable parts are securely fastened, and that the supply cord
and plug are not trailing. Detach hose and wand from machine for ease of carriage.
Do not lift or transport the machine when it contains liquid, as it will add considerable weight.
Take extreme care when moving the machine up and down the stairs.
Caution – Incorrect lifting techniques may result in personal injury. We advice that the manual handling regulations are followed.

Electrical Connection

• Before connecting the machine to the power supply, check that your supply voltage corresponds with that marked on the rating
label on the rear of the machine.
• IMPORTANT – If the supply cord is damaged, it must only be replaced by a special cord available from the manufacturer or an
authorized service agent.
Should an extension cord be used, ensure cord rating is adequate for the equipment. Do not use extension cord in coiled condition as
this could result in overheating of the cord.

Controls

1. Hose release catch
2. Vacuum hose
3. Solution outlet
4. Anti-foam tank
5. Solution pump switch
6. Vacuum switch
7. Machine cover
8. Removable solution tank
9. Removable recovery tank
6