Auxiliary Functions; Warning Symbols - Beko DPU 7360 X Mode D'emploi

Auxiliary functions

Audio Warning
The machine will give an audio warning
when the programme comes to an end.
If you do not want the machine give an
audio warning, press the Volume Level
button repeatedly until "x" appears on the
display. Use the same button to adjust
the volume level.
C
You can activate this function either
before or after the programme starts.
Cancel Audio warning
audio warning level 1
Dryness level
Used to adjust the required dryness level.
More drying is performed compared
to the default settings when "+" sign
appears and less drying is performed
when "-" sign appears. Programme
duration can change depending on the
selection.
C
You can activate this function only
before the programme has started.
Anti-creasing
You can use Anti-creasing function to
prevent laundry from creasing if you will
not take the laundry out after the program
has come to an end. This program
rotates the laundry in every 240 second
for 2 hours to prevent creasing.
Anti-creasing is activated but the
programme is still running in the first
display image below. Drying cycle is
completed and the Anti-creasing step has
started in the second display image.
Audio warning Audio warning
level 2 level 3
C
Press Anti-creasing button to activate
this function.
Changing the contrast
Adjust the display contrast in order to
make the symbols on the display appear
clearer. It may particularly be necessary to
change the contrast setting of the display
when the dryer is installed over a washing
machine.
Press and hold the Spin Speed / Timer
Programme button for 3 seconds.
When the contrast is changed, all
symbols on the display will appear for
3 seconds in order to indicate that the
process is complete.
C
Perform the same procedure to revert
back to the previous contrast setting.

Warning symbols

C
Warning symbols may differ
according to the model of your
machine.
Lint filter cleaning
When the programme is completed, a
warning symbol will appear to remind that
the filter needs to be cleaned.
C
If the Filter Cleaning symbol flashes
continuously, refer to "Troubleshooting"
section.
Water tank
When the programme is completed, a
warning symbol will appear to remind that
the water tank needs to be drained.
If the water tank becomes full while
the programme is running, the warning
17 EN