Filter Change - Comedes Lavaero 1000 Manuel D'utilisation

Filter change

After some time in operation, the filter elements must be replaced.
1. filter removal
Always switch and disconnect the device for this purpose.
Remove the
filter cover.
2. The prefilter can be cleaned under running water and does not need to be replaced.
3. Now check the filters. If the HEPA element is not yet too discoloured, vacuum it off with
a vacuum cleaner (preferably outdoors).
4. If the filters are very dirty or discoloured, replace them.
5. Please note that the replacement filters must be removed from the protective film
before they can be inserted into the device.
6. Inserting the filters
EN-11
Remove the
prefilter.
First the HEPA filter element must be used. Make sure
that the filter is inserted with the tab facing outwards.
Secondly, the activated carbon/cold catalysis
combination filter must be used. Make sure that the
filter is inserted with the tab facing outwards.
Always remove the
filters from the
protective film, before
inserting them.
www.comedes.com