Ultraflex T85 Manuel D'installation Et D'entretien page 10

ULTRAFLEX
3.3 Cable connection to the steering system
1 Determine the correct cable entry position into the helm according to the proper steering system.
2 Remove protective tube from Ultraflex M66
cable end and insert the helix cable into the helm.
4 Lock the end fitting with the screw (15) and nut
(16) with torque of 6 Nm (53 in lbs)
page 10
of 39 -
T85 STEERING SYSTEM
PUSH OR PULL TURNING DIRECTIONS
Installation and maintenance manual
3 Turn the steering wheel so as to "pull" the
cable into the helm, aligning the end fitting recess
A with screw hole in helm base (14).
A
14
16
15