Integrated terminal plug:
If no XLR connector is detected on DMX OUT connector, a 120Ω terminal plug is automatically
activated. Additional terminal plug on the last unit is not necessary.
Protocol: Wireless Solution W-DMX
•
Refer to the OEM User's manual for general
•
recommendations and use of the transmitter :
http://www.wirelessdmx.com
The antenna must be clearly visible from the transmitter
•
See. 4.7.2 for activation
•
Do not connect a DMX IN data cable in case of
•
wireless DMX use
DMX mode:
The first unit receives the DMX signal via the wireless network, then all the other units are
connected o the first one via DMX data cable
Wireless DMX option
TM
- 8 -
Maximum:
32 units
EN