Operating Menù - Nuova Simonelli Mythos 1 Manuel D'instructions

EN
4.3.1 OPERATING MENÙ
For each dose and each item on the menu, the available keys will flash.
When the machine is switched on, after the lamp test has been completed, the display will
show the control unit software release for a few seconds.
After this, the top line of the display will read DOSE X (where X is the number of doses
selected and varies from 1 to 3), while the bottom row of the display shows the time (in sec-
onds) set for the selected dose.
To change the dose, press the key and the display will show the new selected dose on
the top line, while the relevant value setting will appear in the bottom.
To set the pour time for the selected dose, it is necessary to use the up or down keys.
The new value setting will be automatically saved when the key is pressed or when a
pour is begun.
To start pouring, it is necessary to insert the portafilter: the bottom line will show the pour
time, as it scrolls.
In case of deactivated splitting, (see following paragraph), the pouring action will continue
until the end, with or without portafilter inserted.
26