Scope Of Delivery; Intended Use; Technical Description - Dometic PERFECTVIEW AMP 100 Instructions De Montage Et De Service

AMP100
3

Scope of delivery

No. in fig. 4,
page 4
1
2
–
–
4

Intended use

AMP100 (ref. no. 9600000210) is a control box for connecting the camera models CAM33,
CAM44 and CAM80CM with motor-driven protective flaps to a monitor for use as a reversing
video system.
5

Technical description

AMP100 is used to connect cameras CAM33, CAM44 and CAM80CM to a monitor with cinch
video input (RCA). The control box supplies the control signal for the camera's motor-driven
protective cover and the activation signal for the monitor. It also provides a proper supply of power
to the camera.
In default mode, the camera is activated when you switch on the monitor or engage the reverse
gear. The monitor is also activated when you engage the reverse gear.
If a video source in addition to the camera, such as a navigation system or DVD player, is connected
to the monitor, you need to set and connect the control box accordingly. In that case, the control
signal for the camera protective cover is not triggered when you switch on the monitor but only
when you shift into reverse gear.
If you would then like to use the camera when the vehicle is parked or when driving forwards,
you must install the supplied rocker switch.
The control box can be connected to 12 V to 24 V DC voltage.
EN
Quantity Description
1 Control box with cable set
1 Rocker switch
1 Installation material with cable fasteners
1 Installation and operating manual
Scope of delivery
Ref. no.
RV-AMP-SW
9