Dometic PERFECTVIEW AMP 100 Instructions De Montage Et De Service page 10

Technical description
5.1 Connections
The control box has the following connections:
No. in
fig. 5, page 5
3
4
5
6
7
8
9
10
Connection description
AV output (cinch plug) for connecting...
• to a navigation system with an AV input (cinch socket)
• to another monitor with an AV input (cinch socket) or to a video recorder
Camera connection
Green control cable (+ signal) for connecting the positive cable of the
reversing light
When you shift into reverse gear, the control box is activated via this cable.
Black control line (+ signal) with flat plug fitting for connection of the
RV-AMP-SW rocker switch.
This line must be connected when a video source in addition to the
reversing video camera – such as a navigation system or DVD player – is
connected to the monitor and you would like to activate the camera when
parked or driving forwards.
Black control line (+ signal) with round plug lug for connection to the
monitor's S/BY signal input.
The monitor is switched on via this line when the control box is activated.
Red cable: connection to 12 V to 24 V positive (e.g. connected positive
terminal, terminal 15)
Brown cable: connection to earth (terminal 31)
AMP100
EN