Setting The Control Box; Warranty - Dometic PERFECTVIEW AMP 100 Instructions De Montage Et De Service

AMP100
7

Setting the control box

AMP100 must be adapted to certain connection options. There are two small DIP switches for this
purpose.
No. in
fig. 5, page 5
1
2
➤ Set the DIP switches as desired based on the table.
8

Warranty

The statutory warranty period applies. If the product is defective, please contact your retailer or the
manufacturer's branch in your country (see the back of the instruction manual for the addresses).
For repair and guarantee processing, please include the following documents when you send in
the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
EN
Description
DIP switch 1 is used to select the connected camera:
• CAM33/44: DIP switch in the ON position
• CAM80CM: DIP switch in the OFF position
DIP switch 2 is used to set image mirroring on camera CAM80CM:
• DIP switch in the ON position: The image is not mirrored.
• DIP switch in the OFF position: The image is mirrored.
Setting the control box
13