Care & Maintenance; Declaration Of Conformity - Pattfield Ergo Tools PE-1500 MNF Mode D'emploi

Care & Maintenance
Caution! Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
- In case of excessive sparking the carbon
brushes should be checked by a qualified
electrician. Important: The carbon brushes
shall only be removed or replaced by a qual-
ified electrician.
Caution! If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.

Declaration of conformity

We declare, that the product
described in Technical Data:
1500 W Wall Chaser PE-1500 MNF
manufactured for:
Hornbach Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Direcitve 2006/42/EC
EMC Directive 2004/108/EC
and in accordance to the following applicable
harmonized standards:
EN 60745-1:2009+A11:2010
EN 60745-2-22:2011
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-3:2008
Andreas Back
Head of Quality Assurance &
Person authorised to compile the technical file
Bornheim, 08.07.2014
Hornbach Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Deutschland
EN 89