Technical Data; Care & Maintenance; Declaration Of Conformity - Pattfield Ergo Tools PA-2000HP Notice Originale

Technical Data

Nominal voltage
Rated power
Temperature
Air flow
Protection Class
Care & Maintenance
Caution! Make sure the tool is
switched off and unplugged.
- Always keep the tool clean, dry and free of
oil or grease.
- Wear safety glasses to protect your eyes
whilst cleaning.
- For safe and proper working, always keep
the machine and ventilation slots clean.
- Regularly check to see if any dust or foreign
matter has entered the grills near the mo-
tor and around the on/off switch. Use a soft
brush to remove any accumulated dust.
- If the body of the tool needs cleaning, wipe
it with a soft damp cloth. A mild detergent
can be used but nothing like alcohol, petrol
or other cleaning agent.
- Never use caustic agents to clean plastic
parts.
- Lubricate all moving parts at regular inter-
vals.
- Periodically check all fixings. These could
become loose with time due to vibration.
Caution! If the supply cord is dam-
aged, it must be replaced by the
manufacturer or its service agent or simi-
larly qualified person in order to avoid haz-
ard.
230 V / ~50 Hz
2000 W
70 / 450 / 600 °C
550 / 350 / 550 l/min
/ II

Declaration of conformity

We declare, that the product
described in Technical Data:
2000 W Heat gun PA-2000HP
manufactured for:
Hornbach Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
and in accordance to the following applicable
harmonized standards:
EN 60335-1/A14:2010
EN 60335-2-45/A1:2008
EN 55014-1/A1:2009
EN 55014-2/A2:2008
EN 61000-3-2/A2:2009
EN 61000-3-3:2008
EN 62233:2008
Andreas Back
Head of Quality Assurance
Bornheim, 01.03.2013
EN 69