Sage Nutri Juicer Plus Guide Rapide page 5

7. Place the pulp container into position by tilting
the base of the pulp container away from
the motor base and slide the top of the pulp
container over the bottom of the juice cover.
Tilt the base of the pulp container back into
the motor base ensuring it is supported by the
container support extending from under the
motor base.
To minimise cleaning, line the pulp container with
a plastic freezer bag to collect the pulp. Pulp can
then be used in other dishes, or as compost for the
garden or discarded.
8. Place the juice jug provided under the spout
on the right-hand side of the juicer. The juice
jug lid can be used to avoid any splatter.
Alternatively you can fit the custom-designed
juice nozzle over the juice spout and place a
glass underneath. The juice nozzle will prevent
splatter, ensuring mess free juicing.
8
FOR USE WITH FROOJIE
®
EXTRACTOR
1. Place the filter bowl surround on the top of the
motor base.
2. Place the Froojie Disc into the filter bowl
®
surround and onto the motor drive coupling.
Push down until it clicks into place. Ensure the
Froojie Disc is fitted securely inside the filter
®
bowl surround and onto the motor base.
Never use Froojie Disc without Froojie Insert.
® ®
They must always be used together.
3. Place the Froojie Insert into the filter bowl
®
surround, making sure the warning label on the
handle is facing upwards.
To assemble remaining parts follow steps 4–7
listed on previous page.
NOTE
There is no need to use pulp container when using
Froojie extractor.
®
PREPARATION OF FRUIT
AND VEGETABLES FOR
FROOJIE EXTRACTOR
®
Only soft fruits should be used with the
Froojie extractor.
®
When using fruits with hard inedible skins, such
as mangoes, pineapple or kiwi fruit, always peel
before juicing.
When using fruits with a hard core such as
pineapple, always remove this before juicing.
All fruits with pits, hard seeds or stones such as
nectarines, peaches, mangoes and apricots must
be pitted or deseeded before juicing.
Passionfruit pulp, peeled kiwi fruit and berries can
be processed without removing seeds.
When using the Froojie extractor, use low speed
®
(speed 1). Always ensure motor is running before
adding fruit and/or vegetables to feed tube.
FROOJIE EXTRACTOR SPEED
®
Apricots (stone removed) 1
Bananas (peeled) 1
Kiwi fruit (peeled) 1
Mangoes (peeled, stone removed) 1
Melons (peeled) 1
Pears soft (stalk and core removed) 1
Pineapple (peeled and cored) 1
Raspberries 1
Strawberries (stalks removed) 1
Watermelon (peeled, seeds
1
removed)
Use speed 2 to push out any
2
remaining fruit pulp in juice collector
WARNING
Do not put hard fruit and vegetables (i.e. Carrots,
apples, fresh beetroot, etc.) or ice through juicer
when using Froojie extractor. This could damage
®
parts of the unit.
PREPARATION OF FRUIT
AND VEGETABLES FOR
JUICE EXTRACTOR SPEED
SELECTOR TABLE
FRUIT / VEGETABLES SUGGESTED
SPEED
Apples 5
Apricots (stone removed) 2
Beetroot (cleaned, trimmed) 5
Blueberries 1
Broccoli 4
Brussel Sprouts (trimmed) 5
Cabbage 4
Carrots (cleaned) 5
Cauliflower 4
Celery 5
Cucumber (peeled) 2
Cucumber – soft skinned 4
Fennel 5
Grapes (seedless) 1
Kiwi fruit (peeled) 2
Mangoes (peeled, stone removed) 2
Melons (peeled) 1
Nectarines (stone removed) 2
Oranges (peeled) 3
Peaches (stone removed 2
Pears – hard (stalks removed) 5
Pears – soft (stalks removed) 2
Pineapple (peeled) 5
Plums (stone removed) 2
Raspberries 1
Tomatoes 1
Watermelon 1
EN
9