Assembly Instructions; Features; Control Panel - Schumacher Electric SP1297 Guide D'utilisation

8.3 USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension
cord, follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger, as
specified below:
Length of cord (feet)
AWG* size of cord
*AWG-American Wire Gauge
9.

ASSEMBLY INSTRUCTIONS

9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.

10. FEATURES

1

11. CONTROL PANEL

DIGITAL DISPLAY
The digital display indicates the status of the battery and charger. See the Display
Messages section for a complete list of messages.
NOTE: During charging, the display will go into sleep mode and will not display any
messages. To turn the display back on, press the display button.
DISPLAY/ON BUTTON
The digital display will show the battery's voltage and percentage of charge.
Press the display button to show the charge progress.
25
18
4 5
3
2
8
50 100
18 16
1. AC Power cord
2. Digital display
3. Display/ON button
6
4. Charging/Charged/Maintaining
LED indicator
5. Hook attachment
6. 12V accessory plug quick-connect
7. Battery clamp quick-connect
7
8. Ring terminal quick-connect
• 8 •
150
14