Lacanche L1HM 900 Manuel D'installation Et D'utilisation page 90

SETTING UP THE HOOD
3 - Hang the hood to hood profile support.
5 6
4 - Insert the screws M5 x 35 and HM6 x 30/ figure and .
5 - Tighten the screws lightly to flatten 6553377 hood to the wall.
6 - To level by tightening or loosening the 2 screws M5 x 35 and HM6 x 30.
7 - End of the hood to the wall plate by tightening the screws HM6 x 30.
M5 x 35 M6 x 30 Screw
5
INSTALLER'S MANUAL
88