Publicité
Motors (NOVY only):
Equipped with motors equipped with engines with a high flow / pressure ratio, Lacanche hoods are
also very quiet thanks to their built-in noise damper.
Depending on the model, one or two solutions of motorization are proposed according to the models:
L1HM: Direct suction hood - Integrated motor
Available for models with a cladding width between 900 and 1200 mm, suitable for furnaces
from 700 to 1100 mm.
Hood equipped with filterinox, stainless steel sensor, integrated motor, electronic control,
halogen lighting. Saturation indicator of the grease filter and the activated carbon cassette.
L2HM-E: Radial suction hood - Integrated or dissociated motor
Available for models with a cladding width between 900 and 2400 mm, suitable for ranges
from 700 to 2200 mm.
Hood, equipped with stainless steel filter, stainless steel sensor, adjustable LED lighting,
integrated dissociable motor, 3 speeds and «Power» function, remote control.
In the dissociated configuration, the motor is easily installed remotely inside the house (attic,
storeroom, garage ...) using a connection kit (Ref .: LKRH) and flexible ducts to spring.
Power Supply:
230 V
Installation:
The installation of Lacanche hoods is simplified thanks to a good accessibility to the technical
elements.
It is necessary, before installation, to make sure of the strength of the supporting wall.
If it is easy to drill into hollow walls (plasterboard, brick, slabs, etc.), it is more difficult to attach the
hoods. For those to be fixed correctly, it is advisable to choose a system of fixation adapted to the
hollow materials and to install it in the rules.
INSTALLER'S MANUAL
55
Publicité
Chapitres
