Adjusting The Clock; Changing The Batteries - MELICONI AC100 Mode D'emploi

I
EN
MELICONI remote control – AC100
Thank you for choosing a Meliconi remote control.
Conservare il presente libretto per future consultazioni Keep this booklet for future reference
The AC100 remote control is designed to command all the main
functions of a domestic air conditioner.
The remote control display is fi tted with a back light to make it
easier to use in the dark.
WARNING the remote control does NOT have a permanent
memory, so if the batteries run completely fl at or are removed,
the time setting and activation CODE will be lost.
To avoid this inconvenience, change the batteries rapidly (within
15 seconds) and without pressing any keys.
AVVERTENZE PER LA SICUREZZA SAFETY WARNINGS
The remote control and batteries must not be exposed to exces- Il telecomando e le batterie non devono essere esposti a fonti di
calore eccessivo, quali irraggiamento solare, fuoco o similari. Il sive heat, like direct sunlight, fi re or similar heat sources. The
prodotto non è un giocattolo; non deve essere lasciato alla porta- product is not a toy. Keep out of reach of children and pets.
ta di bambini o animali domestici.
INSERIMENTO DELLE BATTERIE INSERTING THE BATTERIES
The remote control requires 2 new 1.5V alkaline AAA/LR03 bat-
teries, not included. Insert them as illustrated.
Do NOT use rechargeable batteries.
CHANGING THE BATTERIES: The batteries should be changed
when the symbols and characters on the LCD display begin to
lose clarity or when the operating capacity of the remote is re-
duced.
IMPORTANT! To avoid losing the remote control settings (time
and code), change the batteries rapidly (within 15 seconds) and
without pressing any keys.
Si raccomanda di non lasciare inserite batterie esaurite, Do not leave fl at batteries in the remote,
potrebbero rilasciare liquido e danneggiare il telecomando as they may leak liquid and damage it

ADJUSTING THE CLOCK

The remote control also features a clock. To adjust it, proceed
as follows:
A) Press and hold down the [SET] key on the MELICONI remote
control and, without letting it go, press the [MODE] key for an
instant. At this point the hours display will start to fl ash.
B) Using the TEMP [▲] and [▼] keys set the AM / PM hour format
(to speed up scrolling keep the keys held down).
C) Press the [SET] key again to access the minutes setting.
D) Now use the TEMP [▲] and [▼] keys to set the minutes.
E) Press the [SET] key again to confi rm and exit the clock adjust-
ment procedure.
ACTIVATING THE REMOTE CONTROL ATTIVAZIONE DEL TELECOMANDO
Before using the remote control it is essential to set a specifi c
code for the air conditioner you wish to control.
Use one of the following methods, in the order given below, to
identify the specifi c code and set it on the remote control:
1) BRAND CODE SEARCH
2) DIRECT CODE SETTING
3) AUTOMATIC GLOBAL SEARCH
4) MANUAL GLOBAL SEARCH
Having identifi ed the correct code, shown on the display at bot-
tom right, note it down on the label inside the battery cover; as
the next time you change the batteries you may need to reset the
remote control code.
• 1 Brand code search
9
IMPORTANT!