Fitting The Batteries; Secondary Functions - MELICONI PERSONAL 2 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

The remote control requires 2 new 1.5 V AAA/LR03 alkaline batteries. Fit

them as shown.

Try pressing a number and check that the indicator light remains on

continuously until the button is released. If the light blinks, the inserted

batteries are low, therefore they need replacement. IMPORTANT: do not

use rechargeable batteries.

Secondary functions are functions that are used

only occasionally or are of minor signiﬁ cance.

To enable them, press the SHIFT button and, at

the same time, press the button corresponding

to the desired function, which can be identiﬁ ed

by the drawing.

For example, to enable the RATIO function, press

the SHIFT button and press the BACK button at

the same time, aiming the remote control towards

the TV set.

N0000091 Istruzioni Personal 2.indd 7