Timer Function - MELICONI AC100 Mode D'emploi

G) Once you have identifi ed a suitable code, shown on the dis-
play at bottom right, note it down on the label inside the battery
cover. In the future it may be necessary to reset the remote con-
trol code.

TIMER FUNCTION

WARNING!
The TIMER ON and TIMER OFF functions are ONLY
available if the air conditioner includes them
ONLY one of the TIMER functions can be set, not both of them.
Make sure the air conditioner is ON.
Set up the required operating conditions on the remote (temper-
ature, fan etc.)
● DELAYED SWITCH ON SETTING
Press the [TIME ON] key for an instant, the air conditioner will be
switched off and a switch on delay of 1 hour will be set.
To set a longer delay press the [TIME ON] key again until the
required delay is shown on the display.
To delete the setting, press the ON/OFF [
● DELAYED SWITCH OFF SETTING
Press the [TIME OFF] key one or several times, set on the dis-
play the required delay (in hours) for the automatic air condition-
er switch off.
To delete the setting, press the ON/OFF [
PROTECTING THE CODE
This function stops the remote control setting code from being
accidentally changed.
To activate the function, proceed as follows:
Press and hold down the [SET] key, and without releasing it,
press the [ ] key for an instant; at which point the icon is shown
on the display .
To deactivate the protection repeat the procedure.
LED TORCH
The remote control includes an LED torch that can be acti-
vated by pressing the key
CAUTION: Do not dispose of batteries in the environment, take them apart or throw them in a fi re.
Incorrect use may harm the environment and give rise to health and safety hazards. The crossed-
out wheelie bin symbol indicates that the batteries must be disposed of in compliance with current
legislation.
The symbol showing a wheelie bin with a cross through it which appears on the device indicates that
at the end of its useful life the product must be collected separately from other waste. Therefore, at
the end of the device's life, you must take it to appropriate centres for the differentiated collection
of electrical and electronic waste, or return it to the retailer when purchasing a new device of
equivalent type, on a one-for-one basis. Suitable differentiated collection to allow subsequent
recycling of the decommissioned device, with environmentally-compatible treatment and disposal,
help to prevent any negative effects on the environment and health and to promote the recycling of
the materials of which the device is made.
] key.
] key.
.
TROUBLESHOOTING
Various malfunctions are caused by using batteries that
are not suffi ciently charged.
We recommend checking them and, if necessary, replacing
them as shown in the INSERTING THE BATTERIES section.
● IF THE REMOTE CONTROL IS NEW AND YOU CANNOT
MAKE IT WORK
Check you have carried out all the instructions indicated in the
manual precisely. If necessary repeat all the steps described
above.
● IF THE REMOVE CONTROL STOPS WORKING
Remove the batteries, press several keys and insert NEW batter-
ies.
Set the specifi c code again for the device you wish to command,
as described in the section REMOTE CONTROL ACTIVATION.
Make sure too that the remote control is pointing at the device
and that there are no obstacles in the way.
● IF THE REMOTE CONTROL DOES NOT EXECUTE CERTAIN
FUNCTIONS
To obtain the required function, refer to the DESCRIPTION OF
KEYS AND FUNCTIONS section.
If some of the MAIN functions are not available, you are probably
using an incorrect code. Find and set a more suitable code as de-
scribed earlier.
If you would like more detailed information about the product,
please consult the www.meliconi.com/guida website. NOTE!
When contacting technical support it is INDISPENSABLE
that you communicate the BRAND and MODEL of the de-
vice you want to control and which MELICONI remote con-
trol you are using.
To contact an operator call our call-center at +39 02 66012766
or send an e-mail to: telecomandi@meliconi.com
2 year WARRANTY
Keep the purchase receipt to validate the warranty. The warranty
is voided if the product is tampered with or used improperly.
MELICONI S.p.A. - Via Minghetti, 10
40057 Cadriano di Granarolo Emilia - BOLOGNA - ITALY
www.meliconi.com - e-mail: info@meliconi.com
11
WARNING!
ASSISTANCE