U.S.Robotics USR5660A Mode D'emploi page 5

CAUTION: The U.S. Robotics 56K PCI Faxmodem requires a standard analog telephone
line. Do not connect your modem to a digital telephone line. Digital lines are commonly
used in office buildings and hotels. If you are unsure whether your line is analog or
digital, ask your network administrator or your local telephone company.
Step 3: Install the modem drivers.
All Operating Systems
Reconnect your computer and peripherals and turn your computer on.
NOTE: If at any time during the installation you are prompted to select the location of
your installation drivers, the following is the correct location on the Installation CD-ROM
(assuming D: is your CD-ROM drive).
Windows Me/98/95 drivers - D:\
Windows XP/2000 drivers - D:\2000_XP
Windows 95
Insert the Installation CD-ROM into your CD-ROM drive before Windows opens. You need to install
both the U.S. Robotics V.92 PCI Faxmodem Enumerator and the U.S. Robotics V.92 PCI
Faxmodem.
NOTE: If at any time during the installation you are prompted to select the location of
any installation files, the location of the files on the Installation CD-ROM is D:\ (assuming
D: is your CD-ROM drive).
When the New Hardware Found or Update Device Driver Wizard appears, follow the on-screen
instructions.
Windows 98
You need to install both the U.S. Robotics V.92 PCI Faxmodem Enumerator and the U.S. Robotics
V.92 PCI Faxmodem.
Log into Windows. Insert the Installation CD-ROM into your CD-ROM drive. When the Add New
Hardware Wizard appears click Next. Select Search for the best driver for your device
(Recommended) and click Next. Click Specify a location and type D:\ (If your CD-ROM drive uses
a different letter, type that letter in place of "D"). Click Next. When Windows locates the correct
drivers for the U.S. Robotics V.92 PCI Faxmodem Enumerator, click Next. When Windows is
finished installing the drivers, click Finish.
The wizard will then detect and report a search for drivers for U.S. Robotics V.92 PCI Faxmodem.
Click Next. Choose Search for the best driver for your device (Recommended) and click Next.
Click Specify a location and type D:\ (If your CD-ROM drive uses a different letter, type that letter
in place of "D"). Click Next. When Windows locates the correct drivers for the U.S. Robotics V.92
PCI Faxmodem, click Next. When Windows is finished installing the software, click Finish.
Windows Me
You need to install both the U.S. Robotics V.92 PCI Faxmodem Enumerator and the U.S. Robotics
V.92 PCI Faxmodem.
3