Environmental And Product Recycling; Battery Removal; Technical Specification - Vileda robot Mode D'emploi

For further help, technical advice, or to order spare or replacement parts contact Vileda (address see
last page)

Environmental and Product Recycling

The Vileda Relax Plus fulfils the EU directive 2002/96/CE, covering Electrical and electronic appliances and the
management of its disposal.
The packaging material is entirely recyclable, and marked with the recycling symbol. Follow local regulations for
scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of children's reach, as they are
potentially dangerous.
When the product has reached the end of its life please do not dispose of it with general household waste. To pre-
vent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources.
The symbol identifies the Vileda Relax Plus as a product submitted to the regime of selective electrical appli-
ance recycling collection.
The product contains a NiMH battery which should not be disposed of with general household waste. Deposit
the battery in an official collection point for its recycling.
Batteries can be detrimental for the environment and can explode if they are exposed to high temperatures.
The violation of these precautions could cause fire and / or serious injuries.
For more detailed information about treatment, recovery and recycling of this product, please contact your local
city office, your household waste disposal service or the shop where you purchased the product.
1. Turn off the power switch and put the robot on a flat surface with its bottom up.
2. Use a cross-head screwdriver to loosen the two screws and remove the battery cover plate.
3. Lift the battery and disconnect the battery by pressing and pulling the flaps at the electrical connector.
Battery type
Charging time
Charging period for fully discharged battery
Charger output
Charger input
Unit Average Power
Dust Capacity
Unit Size

Battery Removal

Technical Specification

14.4V DC, 1700 mAh NiMH
4-5 hours
12 hours
24 V DC
100-240 V AC
24W
0.35 l
32x9 cm
G
13