Protecting The Environment - EGO POWER+ SNT2400E Manuel De L'opérateur

EN
LUBRICATING THE MACHINE
All of the bearings in this product are lubricated with a
sufficient amount of high grade lubricant for the life of
the unit under normal operating conditions. Therefore,
no further bearing lubrication is required.
REPLACING AND ADJUSTING THE SKID SHOES
1. Remove the batteries.
2. Loosen and remove the nuts, gaskets and the skid
shoe from the screws (Fig. G1).
3. Replace the skid shoe with a new one, if necessary.
4. The height of the skid shoes can be adjusted
according to the actual snow conditions without
thoroughly removing the nuts, just loosen them, adjust
the skid-shoe position and then retighten (Fig. G2).
REPLACING THE SHEAR PIN
The shear pins are located in the auger shaft (Fig. H1).
They aid in absorbing the instant stall torque when the
auger strikes obstacles during working and protect the
gearbox and motor from damage.
H-1 Auger Shaft
To replace the shear pins, remove the batteries, remove
the broken shear pin from the auger shaft and replace it
with new bolts.
NOTICE: Two additional shear pins are stored onto the
chute assembly, replace with the new one if the original
one is broken (Fig. H2).
STORING THE SNOW BLOWER
CAUTION:
Ensure that all melted snow that may drip
from the snow blower is properly wiped up to prevent a
slip and fall hazard.
◾
Remove the battery pack(s) and store in a secure
location out of the reach of children.
Before storage, wipe any moisture, dirt, or debris
from the battery area.
◾
Wipe the snow blower with a clean dry cloth.
◾
Check all nuts, bolts, knobs, screws, etc., for tightness.
◾
Inspect moving parts for damage, breakage, and wear.
Have repairs made on any damaged or missing parts.
◾
Store the snow blower in a clean, dry, enclosed place
out of the reach of children.
◾
Do not store near corrosive materials such as fertilizer
or rock salt.
10
56-VOLT LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400E
H-2 Shear Pin

Protecting the environment

Do not dispose of electrical appliances as
unsorted municipal waste, use separate
collection facilities.
Contact your local government for
information regarding the collection
systems available.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being.