Playing A Record; Procedure; Interrupting Playback - Dual DTJ 301 USB Manuel D'utilisation

Playing a record

Playing a record

Procedure

Put a record on the turntable.
Turn the On/Off switch 5 to the "ON" position.
The LED display for the speed selection switch 10
(33 rpm) and the stroboscope lamp 4 light up.
Note:
Using the SPEED selector switches, select the speed at
which you want to play back the record.
Remove the stylus protection if the pickup is
equipped with a removable one.
Remove the clip 14.
Press the start/stop button 6. The turntable 19 starts
turning.
Lift the lift lever 13.
Swing the tone arm (9) over the desired groove.
18
Place the lift lever 13 downwards. The tone arm
lowers onto the record slowly and playback begins.
After playback is finished, replace the tone arm on
the tone arm rest 14 and fasten it using the clip.
Press the start/stop button 6.
Put the on/off switch 5 in the "OFF" position after the
electronic brake has stopped the turntable.
Note:
The electronic brake does not work if the on/off switch is
switched off before the start/stop button is pressed.

Interrupting playback

Place the lift lever 13 upwards.
This lifts the tone pick-up stylus off of the record.