Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
About this handbook
„ Read this documentation before starting up the ma-
chine. This is a precondition for safe working and
flawless operation.
„ Observe the safety warnings in this documentation
and on the machine.
„ This documentation is a permanent integral part of
the product described and must be passed on to the
new owner if the machine is sold.
Explanation of symbols
Caution!
Following these safety warnings carefully can pre-
vent personal injury and/or material damage.
Special instructions for greater ease of under-
standing and improved handling.
2
7
6
5
Overview of ASB 1800 axle
Scope of supply of AL-KO
1
ASB 1800 axle
2
Bowden cable
3
Hydraulic cylinder
4
Hydraulic hose
4
1
4
9
8
2
1
Product description
The axle is an integral part of the braking system.
The ASB 1800 axle is used for lowering a trailer. The low-
ering mechanism with integrated hydraulic cylinder works
between the wheel and the axle body. The wheels are
controlled as follows by means of a special pump unit
with remote control:
„ Lower all wheels together
„ Optionally raise one or both sides
The ASB 1800 axle is designed as a split axle and can
be used as a single-axle or tandem system.
Information about the operation, maintenance
and care of parts 5, 6, 7, 8 and 9 can be found in
the operating instructions of the manufacturer of
the superstructure or the supplier of the hydraulic
equipment.
3
Not in scope of supply of AL-KO
5
Compact hydraulic unit
6
Control box
7
Switch box
8
Flow regulator
9
Control cable
Translation of the original operating instructions
Lowerable axle
Publicité
Table des Matières
