ProMariner DIGITAL ProMar1 Série Manuel Du Propriétaire Et Guide D'installation page 12

Typical Wiring
19
Fig. 6 ProMar1 DS 4/4/4 and 5/5/5 Triple Bank Charger for 3 12V Batteries
24 VDC Trolling Motor or House Battery Configuration with (2) 12 VDC Batteries
Connected with a Series Jumper Plus Dedicated 12 VDC Engine Start Battery
Note:
Indicates Jumper Series
ProMar1
Indicates Fuse
3 Bank
Charger
For Engine Battery
Cable 1
Use Cable 1
_
Bat 1
+ +
12 VDC Engine Two 12 VDC Batteries Connected with a
Crank Battery Series Jumper for a 24 VDC Trolling Motor
DS
Cable 2 Cable 3
_ _ Top View
Bat 2 Bat 3
of Battery
+
Fig. 7 ProMar1 DS 4/4/4 and 5/5/5 Triple Bank Charger for 3 12V Batteries
Dedicated 36 VDC Trolling Motor Battery Configuration with (3) 12 VDC Batteries
Connected with (2) Series Jumpers
Note:
Indicates Jumper Series
ProMar1
Indicates Fuse
DS
3 Bank
Charger
For Engine Battery
Cable 1
Use Cable 1
_
Bat 1 Bat 2
+ +
Three 12 VDC Batteries Connected with a (2)
Series Jumper for a 36 VDC Trolling Motor
DANGER: RISK OF ELECTRIC SHOCK.
Do not touch uninsulated portion of output connector or uninsulated battery terminal
if 3 or more batteries are connected in series.
Typical Wiring
Cable 2 Cable 3
_ _ Top View
Bat 3
of Battery
+
20