EGO Power+ ZT4200L Mode D'emploi page 65

LCD
Description
Display
Left steering lever
controlling PCBA
fails.
Left
see "Fault
steering
Plug connecting the
code"
lever fails
controlling PCBA, lo-
cated in the steering
bar, is loosened.
Right steering lever
controlling PCBA
fails.
Right
see "Fault
steering
Plug connecting the
code"
lever fails
controlling PCBA, lo-
cated in the steering
bar, got loosened.
Parking brake PCBA,
Parking
which is in the front
brake
frame assembly, is
see "Fault fails,
broken.
code" the tool
Parking brake
cannot be
switch and/or wire is
driven.
broken.
OFF Charging Port Fault
see "Fault
Charging Port Fault
code"
LED
Fault code
Status
on LCD
Indicator
311/412 OFF
411/312 OFF
309/409 OFF
801 OFF
n/a Solid RED
n/a Solid RED
n/a Solid RED
204 n/a
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC
Beeper Cause
PCBA failure
one beep
Loose con-
nection
PCBA failure
one beep
Loose con-
nection
one beep PCBA failure
Wire/Switch
one beep
failure
The charg-
n/a ing port is in
open circuit.
There is
n/a no power
supply.
The fuse is
n/a
blown.
The charg-
one beep ing port is in
open circuit.
Solution
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.
Check the wall outlet whether there
is 120V supplied or the socket is
good.
Have repairs performed by a quali-
fied service technician.
Have repairs performed by a quali-
fied service technician.
65