Troubleshooting - EGO Power+ ZT4200L Mode D'emploi

TROUBLESHOOTING

PROBLEM
The electric zero turn
mower fails to drive when
the two steering levers
are pushed forward or
backward at the beginning.
Steering level icon blinks
The electric zero turn
mower stops driving.
The driving speed/driving
mode cannot be adjusted
during driving.
The electric zero turn
mower fails to start the
blades when the PTO switch
is engaged.
PTO Switch icon blinks
CAUSE
◾
The combined Ah of the inserted batteries is less
than 15Ah.
◾
The parking brake pedal is set in the braking
position.
◾
The steering levers are not in the open position
when starting the mower.
◾
The operator is not sitting on the seat.
◾
The seat switch is not connected correctly.
◾
Steering levers require a "reset".
◾
The electric controlling components of the
steering levels are failed.
◾
The seat switch got disconnected during driving
on a rough terrain.
◾
This is a feature of the electric zero turn mower
for safe driving.
◾
The combined Ah of the inserted batteries is less
than 15Ah.
◾
The PTO switch is not pushed down when the
mower is stopped last time.
◾
The mower is overloaded at the moment the
blades starting, resulting in motor self-protection.
56-VOLT LITHIUM-ION ELECTRIC ZERO TURN MOWER — ZT4200L/ZT4200L-FC
SOLUTION
◾
In order to start this mower, EGO batteries totaling
15Ah (2 X BA4200/BA4200T) or more are required.
For best performance, we recommend use of EGO
batteries that total 30Ah or more.
◾
Fully depress the parking brake pedal to release it
from the braking position.
◾
Return the steering levers to the open position and
restart the mower.
◾
Only when the operator correctly sits on the seat, can
he operate the mower.
◾
Remove the battery from the mower and disassemble
the seat in the reverse order of the instructions in
section "TO INSTALL THE SEAT" in this manual to
inspect the seat switch connection. Reassemble the
seat and follow the instructions in "STARTING THE
ELECTRIC ZERO TURN MOWER" to restart the mower
to see if the mower can be started. If not, contact a
qualified service technician for repair.
◾
Return the steering levers to the open position and
restart the mower.
◾
Contact a qualified service technician for repair.
◾
Remove the battery from the mower and disassemble
the seat in the reverse order of the instructions in
section "TO INSTALL THE SEAT" in this manual to
inspect the seat switch connection. Reassemble the
seat and follow the instructions in "STARTING THE
ELECTRIC ZERO TURN MOWER" to restart the mower
to see if the mower can be started. If not, contact a
qualified service technician for repair.
◾
The function will activiate only when the mower
wheels are stopped and the steering levers are open.
◾
In order to start this mower, EGO batteries totaling
15Ah (2 X BA4200/BA4200T) or more are required.
For best performance, we recommend use of EGO
batteries that total 30Ah or more.
◾
Push the PTO switch downward and restart the
mower's blades.
◾
Start the mower grass cutting in lower blade speed
first and until the blades are getting successed
rotation, do not accelerate the blade speed as needed.
57