Transporting - Echo EG-10000 Manuel De L'opérateur

Masquer les pouces Voir aussi pour EG-10000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Check the fuel (gasoline), engine oil and air cleaner.
2. Start engine.
3. With appliance such as lighting activated, run the engine for over
ten minutes.
4. Check the following items:
• Engine running properly.
Adequate output.
• Engine switch normally operated.
No leakage of engine oil and fuel (gasoline).

TRANSPORTING

When transporting the generator, make sure that the fuel (gasoline) is
drained from the tank.
To prevent fuel spillage due to the vibration and
impact, never transport the generator with fuel
(gasoline) in the tank. Secure the tank cap.
To avoid the risk of the gasoline flammability, never
leave the generator in an area exposed to direct
sunlight or high temperatures for a long period time.
Keep the fuel in an approved storage tank when transporting.
1. Turn the engine switch to the OFF position.
2. Turn fuel valve to the closed position.
3. Drain the fuel from the tank.
4. Tighten the tank cap.
DO NOT place any heavy objects on the generator.
Select and place the generator in the proper position of the transport
vehicle so that the generator will not move or fall down. Secure the
generator if necessary.
28
WARNING
CAUTION
MAINTENANCE

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Eg-190628-a0000001

Table des Matières