Troubleshooting; Troubleshooting Chart - Echo EG-10000 Manuel De L'opérateur

TROUBLESHOOTING

TROUBLESHOOTING CHART

If you are experiencing a problem that is not listed in this chart,
or have checked all the possible cause listed and you are still
experiencing the problem, see your authorized dealer.
Problem Cause
Engine will not
1.
start
2.
3.
4.
5.
6.
Generator has 1. Check if the DC circuit
no output
2. Check AC receptacle
3. Check to see if engine
Check if engine switch
is off.
Fuel Tank empty.
Check to make
sure generator is
not connected to an
appliance.
Check spark plug for
loose spark plug cap
Check spark plug for
contamination.
Check engine oil level.
breaker is turned off.
and DC terminals for
loose connection.
starting was attempted
with appliances already
connected to generator.
Correction
1. Turn engine switch to the
Choke position.
2. Fill tank ensuring you do
not overfill.
3. If connected, turn off
the power switch on the
connected appliance and
unplug.
4. If loose, push spark plug
cap back into place
5. Remove spark plug and
clean electrode.
6. If engine oil level is
low, add oil as per
instructions.
1. Depress or flip the circuit
breaker into ON position.
2. Secure connection if
necessary.
3. Turn off switch on
the appliance, and
disconnect cable from
receptacle.
Reconnect after generator
has been started properly.
25