5.2
pedestal installation
note:
If an optional ash drawer kit is to be installed, ensure
open side of pedestal is at the front of the appliance.
If not, opening should be at the back.
To avoid being damaged during shipping, the appliance
has been bolted to the pallet and must be unbolted
IÉDESTAL
before the appliance can be installed.
Using the machine screws supplied, secure the
A.
pedestal to the four brackets on the bottom of
the firebox.
Lift the appliance up and gently set down on
B.
EMPLACEMENT
pedestal. Do not pivot appliance up as it could
result in damage to the pedestal.
DU LOGO
5.3
door removal
WARNING
!
•
Burning your appliance in with the doors open or ajar creates a fire hazard that may result in a house and/or
chimney fire.
•
Do not strike or slam door.
•
Never remove the door when the appliance is hot.
Pivot the door open and lift the door and pins off the bushings. Set the
door aside being careful not to scratch the paint.
PIÉDESTAL
EMPLACEMENT
DU LOGO
PEDESTAL
LOGO PLACEMENT
BUSHINGS
finishing
LOWER HEAT
SHIELD
PEDESTAL
LOGO PLACEMENT
PINS
W415-1463 / E / 08.20.18
EN
19