Pedestal Installation; Door Removal - Timberwolf 2200-1 Manuel D'installation Et D'opération

4.2

pedestal installation

note:
If an optional ash drawer kit is to be installed, ensure
open side of pedestal is at the front of the appliance.
If not, opening should be at the back.
To avoid being damaged during shipping, the appliance
has been bolted to the pallet and must be unbolted
before the appliance can be installed.
A.
Using the machine screws supplied, secure the
pedestal to the four brackets on the bottom of
the fi rebox.
B.
Lift the appliance up and gently set down on
pedestal. Do not pivot appliance up as it could
result in damage to the pedestal.
4.3

door removal

WARNING
!
• Burning your appliance in with the doors open or ajar creates a fi re hazard that may result in a house and/or
chimney fi re.
• Do not strike or slam door.
• Never remove the door when the appliance is hot.
1. Pivot the door open and lift the door and pins off the bushings.
2. Set the door aside being careful not to scratch the paint.
fi nishing
PEDESTAL
LOGO PLACEMENT
PINS
BUSHINGS
W415-1930 / A / 10.21.19
EN
19