Get Started; Autostart - Blueair Blue 3210 Manuel Utilisateur

Get started

Step 1
Plug the power cable
into a wall outlet.
On/Off and fan speed controls
Available settings are: Auto, Night, Everyday, Boost and Off.
The indicator lights on the touch button indicate the selected fan speed. The lights
automatically dim down completely 5 seconds after pressing the touch button, indicating a
deactivated fan speed control mode. Press the touch button once to reactivate on/off and
fan speed control. The indicator lights light up and you can adjust the fan speed mode again.

Autostart

The autostart feature automatically restarts the air purifier at the last set speed if it has
been unplugged, used with a power switch timer, or if a power failure occurs.
Auto mode
In auto mode the air purifier automatically controls the airflow based on air quality
information from the sensor.
Step 2
Press the button to
turn the air purifier
on and adjust the fan
speed mode.
8