Performing The Pressing Operation - NovoPress AFP101 Manuel D'utilisation

AFP101
7.2 Commissioning at temperatures below 0°C
EN
1.
2.
3.
7.3

Performing the pressing operation

1.
2.
3.
4.
Insert press jaw.
Perform a few dry runs with the AFP101.
The device is now ready for operation.
CAUTION!
Danger of crushing!
There is a risk of crushed fingers and hands.
Therefore:
– Keep body parts and foreign objects away from the press jaws during the pressing
operation.
– Do not hold the jaw levers with your hands during the pressing operation.
CAUTION!
Keep fingers away from the at-risk zone if no press jaw is fitted (Fig. 4).
Fingers risk being crushed.
Therefore:
– Do not operate the device without the jaws.
– Keep your fingers away from the at-risk zone.
Information!
Comply with the operating instructions for the press tools.
Check whether the nominal width of the press fitting matches the nominal width of the
press jaw.
Observe the system manufacturer's instructions when fitting the press jaws (Fig. 8).
Information!
Make sure that the press jaw is fully closed when pressing is complete
(Fig. 9).
To start the process, press the start button.
When pressing is complete, detach the press jaw from the press fitting (Fig. 10).
20