Tools Required For Assembly (Not Included) - Matrix VERSA VS-S401 Mode D'emploi

UNPACKING
Thank you for purchasing a MATRIX Fitness product. It is inspected before it is packaged. It is
shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly,
confirm all the components by matching them with the exploded diagrams. Carefully unpack the
unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTION
To avoid injury to yourself and prevent damage to the frame components, be sure to have proper
assistance removing the frame pieces from this box. Please be sure to install the equipment
on a stable base, and properly level the machine. Ensure a minimum clearance width of 0.6
meters (24") for access to and passage around MATRIX strength equipment. Please note, 0.91
meters (36") is the ADA recommended clearance width for individuals in wheelchairs.

TOOLS REQUIRED FOR ASSEMBLY (not included)

3MM L-Shaped Allen Wrench
4MM L-Shaped Allen Wrench
5MM L-Shaped Allen Wrench
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
8
If any items are missing please contact your country's local MATRIX dealer for assistance.
0 10 20 30 40 50
mm
VS-S401 TRAINING AREA
10MM L-Shaped Allen Wrench
Phillips Screwdriver
8MM Open-End Wrench
17MM Open-End Wrench
Guide Rod Lubrication
60 70 80 90 100 110
1.67 M
(65.6")
FREE AREA
1.16 M
0.6 (2 )
M FT
(45.3")
WIDE PATH
120 130