Table des Matières
Publicité
Flat Screwdriver
Tournevis à lame plate
Desarmador plano
Headlight Lens
Lentille de la lampe
Lente de la luz
Replacing Headlight Bulb
Slots
Fentes
Ranuras
- 50 -
➢ ➢ Disconnect power cord from
electrical outlet. Lower body to lay
the vacuum cleaner flat.
➢ ➢ Pry out light lens at slots by inserting
screwdriver into slot, pushing down
on the lens and rotating the
screwdriver handle toward unit.
➢ ➢ Remove the light bulb by pulling
straight out.
➢ ➢ To replace the light bulb carefully
insert securely into slot. Replace
lens cover.
CAUTION
Do not use a bulb rated over 9W (13V).
During extended use, heat from the bulb
could overheat surrounding plastic parts.
➢ ➢ Replace lens cover by inserting
bottom tab of lens into slot then
applying pressure to top tabs.
➢ ➢ A "popping" sound indicates lens is
snapped properly in place.
Publicité
Table des Matières
