Bluetooth Operation; Pair Bluetooth-Enabled Devices; Listen To Music From Bluetooth Device - SilverCrest SMS 50 A1 Instructions D'utilisation Et Consignes De Sécurité

Bluetooth operation

You can listen to music from a Bluetooth-enabled
device via this player.

Pair Bluetooth-enabled devices

The operational range between this player and
a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device
and the unit).
Before you connect a Bluetooth device to this unit,
ensure you know the device's capabilities.
Compatibility with all Bluetooth devices is not
guaranteed.
Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter pairing
mode automatically.
1. Press the SOURCE button on the unit or the
BT button on the remote control to select BT
(Bluetooth) mode. "NO BT" will show on the
display if the unit is not paired to any Bluetooth
device.
2. Activate your Bluetooth device and select the
search mode. "SMS 50 A1" will appear on
your Bluetooth device.
If you cannot find the unit, press the PAIR
button on the remote control or press and hold
the button on the unit. The system will enter
pairing mode. The unit will show "PAIR" and
prompt "PAIRING".
3. Select "SMS 50 A1" in the pairing list. On
successful pairing, the display panel shows
"BT" and prompt "PAIRED".
4. Play music from the connected device.
To disconnect the Bluetooth function, you
can :
• Switch to another function on the unit;
• Disable the function from your Bluetooth
device. The Bluetooth device will be
disconnected from the unit after the
"DISCONNECTED" voice prompt.
• Press and hold the
/PAIR on the remote control. The Bluetooth
device will be disconnected from the unit after
the "PAIRING" voice prompt.
Note:
• Enter "0000" for the password if necessary.
• If a connection exist, press the PAIR button
on the remote control or press and hold the
button on the unit to re-activate the pairing
mode, the connection will be interrupted. The
display will show "PAIR".
• If no other bluetooth device pairs with the unit
within two minutes, the punit will recover its
previous connection.
• The unit will also be disconnected when your
device is moved beyond the operational range.
• If you want to reconnect your device to the
unit, place it within the operational range.
• If the device is moved beyond the operational
range, when it is brought back, check if the
device is still connected to the unit.
• If they are connected, the display panel shows
"BT".
• If the connection is lost, the display panel
shows "NO BT". Follow the instruction above
to pair your device to the unit again.

Listen to music from Bluetooth device

If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP), you
can listen to the music stored on the device through
the unit.
If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the unit's
remote control to play music stored on the device.
button on the unit or the
GB/IE 41