Publicité
Linksys E-Series
WPA2/WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA
Enterprise
These option is used in coordination with a RADIUS server (These should only
be used when a RADIUS server is connected to the router )
noTES
If you select WPA2/WPA Enterprise Mixed Mode as your Security
Mode, each device in your wireless network MUST use WPA2/WPA
Enterprise and the same shared key
If you select WPA2 Enterprise as your Security Mode, each device
in your wireless network MUST use WPA2 Enterprise and the same
shared key
If you select WPA Enterprise as your Security Mode, each device
in your wireless network MUST use WPA Enterprise and the same
shared key
RADIUS Server
Enter the IP address of the RADIUS server
RADIUS Port
Enter the port number of the RADIUS server The default is 1812
Shared Key
Enter the key shared between the router and the server
WEP
WEP is a basic encryption method, which is not as secure as WPA
noTE:
If you select WEP as your Security Mode, each device in your
wireless network MUST use WEP and the same encryption and
shared key
Encryption
Select a level of WEP encryption, (40/64-bit 10 hex digits) or
104/128-bit (26 hex digits) The default is 40/64-bit (10 hex digits)
Passphrase
Enter a passphrase to automatically generate WEP keys Then
click Generate
Key 1-4
If you did not enter a passphrase, enter the WEP key(s) manually
TX Key
Select a default TX (Transmit) Key to use The default is 1
Wireless Security
9
Publicité
Chapitres
Dépannage
